Pumps - Cylinders - Hose - Trucks - Industrial - Agricultural - Steering - PTO - Rams

3700 Series - Single Unit 3000 Series - Tandem Unit 5000 Series - Triple Unit 3000 Series - Single Unit

PUMPS

Series Gear Width (in.) 1/2 3/4 1 1 1/4 1 1/2 1 3/4 2 2 1/4 2 1/2 2 3/4 3 1500 GPM 4.2 6.4 8.8 11.1 13.5 15.8 18.1 - - - - HP 7.5 11.0 14.5 18.0 21.5 25.0 29.0 - - - -

Series Gear Width (in.) 1/2 3/4 1 1 1/4 1 1/2 1 3/4 2 2 1/4 2 1/2 2 3/4 3 2500 GPM available 11.0 18.0 23.0 28.0 33.0 37.0 41.0 46.0 - - HP available 18.5 29.0 35.0 41.0 47.5 54.0 61.0 68.5 - -

Series Gear Width (in.) 1/2 3/4 1 1 1/4 1 1/2 1 3/4 2 2 1/4 2 1/2 2 3/4 3 3000/ 3100 GPM available 8.5 13.5 17.5 21.5 25.0 29.0 - - - - HP available 14.0 20.0 26.0 31.5 37.0 43.0 - - - -

Series Gear Width (in.) 1/2 3/4 1 1 1/4 1 1/2 1 3/4 2 2 1/4 2 1/2 2 3/4 3 3700 GPM - available 21.5 27.0 33.0 39.0 45.5 50.5 56.0 - 66.0 HP - available 36.0 44.0 52.0 59.0 66.0 74.5 82.0 N/A 100.5

Series Gear Width (in.) 1/2 3/4 1 1 1/4 1 1/2 1 3/4 2 2 1/4 2 1/2 2 3/4 3 5000 & 5100 GPM available 11.0 18.0 23.0 28.0 33.0 37.0 41.0 46.0 - - HP available 18.5 29.5 35.0 41.0 47.5 54.0 61.0 68.5 - -

Series Gear Width (in.) 1/2 3/4 1 1 1/4 1 1/2 1 3/4 2 2 1/4 2 1/2 2 3/4 3 7500 & 7600 GPM - available 27.5 35.0 42.0 50.0 57.0 64.0 71.0 79.0 87.5 HP - available 45.0 56.0 66.5 77.0 88.0 98.0 108.5 122.0 134.0

Average output/input at 2000 PSI (138 bar) 1800 RPM. Oil viscosity -- 150SUS (32 CST) Consult engineering catalog for pressures to 3000 PSI, RPM to 2400

MOTORS

Gear Width (in.) Series 1- Inch 1 1/2 - Inch 2 - Inch 2 1/2 - Inch 3 - Inch GPM In-lbs. HP GPM In-lbs. HP GPM In-lbs. HP GPM In-lbs. HP GPM In-lbs. HP 1500 14.0 370 12.0 21.0 590 18.5 27.0 795 25.0 - N/A - - N/A - 2500 25.5 670 21.0 38.0 1040 32.5 50.0 1410 44.5 62.0 1740 55.0 - N/A - 3000/ 3100 20.5 555 17.5 29.5 860 27.5 39.0 1130 36.0 - N/A - - N/A - 3700 30.5 700 22.0 44.0 1130 36.0 58.5 1580 50.5 72.5 2060 65.0 85.5 2500 79.0 5000 5100 25.5 670 21.0 38.0 1040 32.5 50.0 1410 44.5 62.5 1740 55.0 - N/A - 7500/ 7600 41.0 970 30.5 39.5 1600 50.0 78.5 2180 68.0 96.5 2760 87.0 115.0 343- 109.0

DUMP-PUMPS Dump-Pump with Direct Mount Dump-Pump for Remote Mounting, Double Shafts and Totally-Enclosed "Airmaster II" Air Shift Control

Flow Rate (GPM) @ 2000 PSI Remote Mount Direct Mount 900 RPM 1200 RPM 1500 RPM 1800 RPM DM 384-15 DMD15XXXS20 13.0 18.0 23.0 28.0 DM 512-20 DMD20XXXS20 17.5 24.0 30.5 37.0 DM 640-25 DMD25XXXS20 21.0 29.0 37.5 46.0 Dump-Pumps are available in three displacements. Shaft size is 7/8" - 13 tooth on DMD and 1" keyed on DM. Dump-Pumps come with built-in relief valve and 3-way valve. Both units, the remote and direct mount versions, are available with "Airmaster II" Air Shift Controls.

FLOW DIVIDERS/INTENSIFIERS

Gear Width (in.) 1 1 1/4 1 1/2 1 3/4 2 2 1/4 2 1/2 2 3/4 3 Series FLOW (GPM) @ 1200 RPM FD3000 8.5 11.0 14.0 16.0 19.0 - - - - FD5000 11.5 15.0 18.0 21.5 24.0 26.5 29.0 - - FD7500 17.5 22.5 27.5 32.5 37.5 42.5 47.5 53.0 59.0

Map & Hours - Shop Services - Custom Rebuilding - Shipping Information - Home Transmissions - Axles - Clutches - Bearings - Drive Shafts - Ring Gears - Transfer Cases Flywheels - Suspension - Power Steering - Heavy Hydraulics - Auxiliary Transmission Differentials - Gauges - Exhaust Brakes - Tow Brakes - Automatic Tire Chains

All prices shown are subject to verification. 1997 - 2005 Copyright Notice All rights reserved.